With models ranging from 45-58 MW, the LM6000-PF/PF+ aeroderivative gas turbines continue to evolve, shattering performance records and taking flexibility and speed to a new level.

Enhance Performance...and Your Bottom Line.

Its 56 percent combined-cycle efficiency is an industry leader, helping you achieve better dollars-per-kilowatt and greater flexibility. With optional SPRINT technology, power output can be increased as much as 10 percent without major modifications.

A Powerful Heritage and Proven Reputation

With over 1,200 units shipped and 33 million combined operating hours, the LM6000 family has more operating experience than any other aeroderivative gas turbine greater than 40 MW.

Faster Installation than Ever Before

The new LM6000 package allows for installation in as little as 3 months for simple cycle and 12 months for combined cycle configurations – the fastest installation time in our history.

LM6000-PF+-9
LM6000-PF+-9_mobile

LM6000-PF/PF+

With 99 percent reliability and 98 percent availability, the LM6000 family is world-renowned for its reliability, flexibility, and quality.

  • Pre-assembled package for easier transport and quick installation
  • Easy onsite maintenance with compact, modular construction
  • Up to 56 percent combined-cycle efficiency 
  • Capable of cycling multiple times per day to meet dispatch profiles
  • 50 MW-per-minute ramping capability with emissions compliance as low as 50 percent
  • 5-minute start capable, able to reach maximum power in less than 10 minutes
  • Dry Low Emissions (DLE) technology provides greater power output over traditional combustors
  • With optional SPRINT technology, power output can be increased as much as 10 percent without any major modifications
  • Prior to delivery, each engine is fully tested at our two state-of-the-art test stands in the United States and Italy  

 

LM6000-PC/PG

Providing power in the 45-59 megawatt range with 99 percent reliability, the LM6000-PC/PG provides superior single annular combustor (SAC) technology.

  • Pre-assembled package can be easily tailored to meet the unique operating requirements of almost any distributed power application
  • More than 700 units shipped with more than 99 percent reliability and 98 percent availability
  • Fuel flexibility and 50 MW/minute ramping capability can meet emissions compliance standards as low as 25 percent of full load
  • Up to 52 percent combined-cycle efficiency
  • Capable of cycling multiple times per day to meet dispatch profiles
  • Can reach maximum power in less than 10 minutes with a 5-minute start
  • Increase power output as much as 10 percent without any major modifications with optional SPRINT technology
  • Each engine is fully tested at our world-class test stands in the United States and Italy prior to delivery
Want to Learn More? 

See it in Action

Our videos can give you an in-depth look at our products, solutions, and how we work with customers just like you.

Tools

Explore our range of tools that let you choose products, keep them up and running, and enhance their power potential.

Product Specifications

LM6000-PF/PF+ LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months. 

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 43.7 48.3 50.6 55.1
Net Efficiency (%) 41 41 40.6 40.4
Gross heat rate (Btu/kWH, LHV) 8,319 8,315 8,400 8,447
Gross heat rate kJ/kWh, LHV 8,778 8,773 8,863 8,913
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – NOx (ppm @15% O2) 15 25 25 25
Footprint – L x W x H (Meters) 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3
LM6000-PF/PF+  LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months. 

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 58.3 63.8 69 74.1
Net Efficiency (%) 54.90% 54.40% 55.70% 54.60%
Gross heat rate (Btu/kWH, LHV) 6,214 6,273 6,130 6,246
Gross heat rate kJ/kWh, LHV 6,556 6,619 6,468 6,590
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – Nox (ppm @15% O2) 15 25 25 25
Footprint – L x W x H (Meters) 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3
LM6000-PF/PF+  LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months. 

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 117 127.9 138.5 148.7
Net Efficiency (%) 55.10% 54.60% 55.80% 54.80%
Gross heat rate (Btu/kWH, LHV) 6,196 6,255 6,110 6,227
Gross heat rate kJ/kWh, LHV 6,537 6,599 6,447 6,570
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – Nox (ppm @15% O2) 15 25 25 25
Footprint – L x W x H (Meters) 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3
LM6000-PF/PF+  LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months.

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 43.7 48.5 50.4 55
Net Efficiency (%) 41.20% 41.20% 40.60% 40.40%
Gross heat rate (Btu/kWH, LHV) 8,281 8,281 8,412 8,450
Gross heat rate kJ/kWh, LHV 8,737 8,737 8,875 8,915
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – Nox (ppm @15% O2) 15 25 25 25
Footprint – L x W x H (Meters) 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3
LM6000-PF/PF+  LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months.

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 58.3 64.1 68.8 74
Net Efficiency (%) 55.20% 54.70% 55.60% 54.60%
Gross heat rate (Btu/kWH, LHV) 6,179 6,239 6,133 6,247
Gross heat rate kJ/kWh, LHV 6,520 6,583 6,471 6,590
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – Nox (ppm @15% O2) 15 25 25 25
Footprint – L x W x H (Meters) 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3 19.7 x 9.9 x 14.3
LM6000-PF/PF+  LM6000-PF LM6000-PF SPRINT LM6000-PF+ LM6000-PF+ SPRINT
 

The LM6000-PF uses Dry Low Emissions (DLE) technology for dual fuel capability and eliminates the need for water in emissions abatement

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user.

 

The LM6000-PF+ has up to 56% combined cycle efficiency, with installation in as little as 3 months.

Product Sheet

SPRINT—spray inter-cooled turbine —technology reduces compressor discharge temperature, enhancing power output for the user

 

Net Output (MW) 116.9 128.5 138 148.5
Net Efficiency (%) 55.40% 54.80% 55.80% 54.80%
Gross heat rate (Btu/kWH, LHV) 6,161 6,221 6,113 6,227
Gross heat rate kJ/kWh, LHV 6,500 6,563 6,450 6,570
Exhaust temp (C) 457 459 500 486
Exhaust temp (F) 855 858 933 906
Exhaust energy (MMBtu/hr) 209 221 244 258
Exhaust energy (MMkJ/hr)  220 233 258 273
DLE/SAC Combustor Technology DLE DLE DLE DLE
Emissions – Nox (ppm @15% O2) 15 25 25 25
Want to Learn More? 

Industrial Applications

Onshore Oil & Gas

Learn how the LM6000-PF+’s reliability, efficiency, and flexibility make it the ideal choice for the oil & gas industry’s ever-changing energy needs.

LEARN MORE  

Offshore Oil & Gas

Floating Production Storage & Offloading (FPSO) & Floating Liquefied Natural Gas (FLNG) customers will appreciate the LM6000-PF+’s smaller footprint, ease of installation, and package durability.

LEARN MORE  

Power generation

For the power generation business, the LM-6000PF+ excels at both cogeneration and combined cycle energy production, making it a flexible workhorse that’s ready for anything.

Learn More