From desert climates to the tropics, to the arctic cold, the rugged 9E.03 heavy-duty gas turbine provides essential power and performs in a vast number of duty cycles and applications. The 9E.04 heavy-duty gas turbine provides increased power and performance while maintaining the simplicity and operational strengths of the 9E.03 gas turbine.

Providing the Widest Range of Fuels Experience

9E turbines can use more than 52 types of fuel— almost the entire fuel spectrum—and can even switch fuels while running under full load.

Rapidly Getting You from Decision to Delivery

With order to operation demonstrated in as few as six months, and fast-start and load capabilities, the 9E has quick installation and operational flexibility.

9E.04: Enhanced Power and Performance

The 9E.04 has multiple features that help reduce fuel costs and increase revenue, such as a 145 MW output and 37 percent simple-cycle efficiency.
9e-03-detail
9E.04 gas turbine

9E.03/9E.04 Gas Turbine (50 Hz)

The 9E is a robust, proven platform that delivers high availability, reliability, and durability while lowering the overall cost-per-kilowatt.

  • Operates on fuels with contaminants, natural gas, light and heavy distillate oil, naphtha, crude, residual oil, syngas, and steel mill/blast furnace gases
  • Dry Low NOx (DLN) combustion with 5ppm NOx* and 25 ppm CO with around 30 percent Modified Wobbe Index (MWI) flexibility
  • Emissions standards that meet World Bank requirements, including dual-fuel heavy fuel oil plants
  • Simple-cycle, combined-cycle, and industrial CHP and mechanical drive applications in a broad range of industries, including electrical utilities/independent power producers, industrial oil and gas refineries, IWPP, aluminum industry for smelting, steel mills, and LNG
  • 9E.04 features new 4-stage turbine module that fits within the same footprint as an already installed 9E gas turbine unit
  • 17-stage compressor with corrosion-resistant material, coatings, and inner barrel brush seals that enhance compressor durability
  • Utilizes proven E- and F-class materials, fired at lower E-class temperatures for hot gas path, with cooling and sealing improvements, improved clearances and optimized work splits between stages
  • Compact footprint with easy addition of incremental power when phased capacity expansion is required

*Assumes ultra-low NOx option is chosen

FORMER NAMES:
Frame 9E, 9E, 9E 3-Series, 9141(E), 9151(E), 9161(E), 9171(E), PG9141E, PG9151E, PG9161E, PG9171E, 9E PIP, 9E AGP, 9E Syngas, 9E BFG, MS9001(E)

Tools & Resources

Explore our range of tools that let you choose products, keep them up and running, and enhance their power potential.

icon-links-final

Product Specifications

9E

Fact Sheet

9E.03 9E.04
50/60 50 HZ 50 Hz
SC Output
(MW)
132 145
SC Net Heat Rate
(Btu/kWh, LHV)
9860 9210
SC Net Heat Rate
(kJ/kWh, LHV)
10403 9717
SC Efficiency
(%, LHV)
34.6% 37.0%
Compressor Pressure Ratio 13.1 13.3
Exhaust Temp
(°F/°C)
1012/544 1007/542
Exhaust Energy
(MMBtu/hr)
828 818
GT Min. Turn Down Load
(%)
35% 35%
NOx Emission
(@ 15% O2 ppm)
5 15
CO Emission
(ppm)
25 25
Exhaust Energy
(MM kJ/hr)
874 863
GT Ramp Rate
(MW/minute)
50 12
Wobbe Variation
(%)
>+/- 30% >+/- 30%
Startup Time - Conventional / Peaking (min.)

30/10 30/10

9E

Fact Sheet

9E.03 9E.04
Block Configuration
(GTs x STs)
1x1 1x1
CC Net Output
(MW)
201 212
CC Net Heat Rate
(Btu/kWh, LHV)
6460 6270
CC Net Heat Rate
(kJ/kWh, LHV)
6816 6615
CC Net Efficiency
(%, LHV)
52.8% 54.4%
Bottom Cycle Type 2PNRH 2PNRH
HP Throttle Pressure
(psia/bar)
1006/69.3 1015/70
HP Throttle Temp
(°F/°C)
986/530 986/530
Reheat Temp
(°F/°C)
N/A N/A
ST Configuration (Type) ST-A200 ST-A200
GT Generator Type (Cooling) TOPAIR TOPAIR
ST Generator Type (Cooling) TOPAIR TOPAIR
Plant Turndown - Minimum load
(%)
46% 46%
Ramp Rate
(MW/minute)
50 12
Startup Time
(RR Hot, minutes)
38 38

9E

Fact Sheet

9E.03 9E.04
Block Configuration
(GTs x STs)
2x1 2x1
CC Net Output
(MW)
405 428
CC Net Heat Rate
(Btu/kWh, LHV)
6410 6220
CC Net Heat Rate
(kJ/kWh, LHV)
6763 6562
CC Net Efficiency
(%, LHV)
53.2% 54.9%
Bottom Cycle Type 2PNRH 2PNRH
HP Throttle Pressure
(psia/bar)
1077/74 1078/74
HP Throttle Temp
(°F/°C)
986/530 986/530
Reheat Temp
(°F/°C)
N/A N/A
ST Configuration (Type) ST-D200 ST-D200
GT Generator Type (Cooling) TOPAIR TOPAIR
ST Generator Type TOPAIR TOPAIR
Plant Turndown - Minimum load
(%)
22% 22%
Ramp Rate
(MW/minute)
100 25
Startup Time
(RR Hot, minutes)
38 38
Want to Learn More?